Tuesday, June 16, 2015

In defense of use separation

How's that for a clickbait title? No, it's not a late April First joke either.

One of the first advice people will read from urbanists is a strong recommendation in favor of mixing uses. It always comes back, however, it is not actually very clearly defined what "mixed use" means, or rather how close must uses be before we consider that they are mixing?

For example, all would agree that the following pattern (green=residential, red=commercial/industrial) is not mixed, as the two uses are grouped together with a buffer (white) between each:
Clearly not mixed
 On the other hand, the following pattern, all would agree, is mixed:
But what about the two following patterns, are they mixed or not?


It's easy to find the first pattern, just check out any cities in sprawl, with stores and industries gathered around highway interchanges and endless exclusively residential areas beyond that:
Search for "stores" near Atlanta, the center of the image is all residential (the stores in the area are mainly false positives or home businesses), stores are concentrated at highway interchanges
However, the second pattern is found next to nowhere. The idea of having stores equally distributed in a city seems to make little to no sense. In some very dense cities, you do have small stores here and there, but most stores still gather in nodes or on certain arterial streets, and offices tend to concentrate in some areas too.

Even in the densest cities, like Barcelona, this tendency for commercial uses to group together is easily seen:
Barcelona, stores in red, restaurants in green, some nodes and corridors identified
Good example of the linear pattern, Montréal's Plateau-Mont-Royal borough, the vast majority of stores located on a few streets, with only a few lone stores located elsewhere, 70% of local trips are done on foot or on a bike

French village, typical example of the central node pattern
So again, what does "mixed use" mean? Clearly, we have plenty of successful cities where uses are separated, in fact, it is hard to find someplace where uses aren't separated to some extent, resulting in active commercial areas and sleepy residential streets, even in the heart of cities.
St-Laurent Boulevard in Montréal, every building is commercial or office
1 bloc away from St-Laurent boulevard, all buildings are residential
A commercial street in Manhattan, again, nearly everything at street level is commercial
Mainly residential street in Manhattan

Mixed use buildings

Some could point out that there are mixed use buildings, especially common in the highest density cities in the world, like Barcelona and Manhattan. The classic mixed use building is quite simply a commercial ground floor with residential apartments or offices on the upper floors, a type of building very common in the world's densest cities.
Mixed use buildings in Barcelona, store fronts on the ground floor, apartments above
These can be seen as an evolution of the traditional urban houses of earlier times, where people lived in the same building in which they worked, in the rooms on the 2nd floor or above, while the ground floor was reserved for their economic occupation, whether it be restaurant, a small office or even a small workshop.

But is it really mixed? Yes, there are 2 or more uses per building, but it is not mixed evenly in the buildings, there is a clear pattern. Commercial uses, if present, are always on the ground floor, I've never seen a building with residential units on the ground floor and commercial uses on the upper floors. We could even talk of vertical use separation.

Why do uses separate?

So clearly, these patterns seem pretty universal, whether a city is planned or not, there is a phenomenon wherein uses will tend to separate. Why is that?

I think the main reason is that locations are not necessarily universally desirable for all uses. In fact, desirability for a given location often varies wildly depending on perspective. If we think about it, we might identify a few desired features of each use.

Residential: people typically want their housing to be located near to transport infrastructure and to stores and services, HOWEVER, people also want privacy and quiet for their residence. Which means that highly-trafficked streets are not desired by residential uses as it results in a lot of noise and may affect privacy, especially for the ground floor. Residential uses therefore want some buffer with main arterials, whether that buffer is horizontal (located on a side street for instance) or vertical (once you're high enough, you're no longer as affected by noise nor do your perceive traffic so much). Once upon a time, before elevators, higher units would be undesirable because of the stairs, but with elevators, that's a moot point.
Residential desirability, per floor, in relation to an arterial (the large black road), red=undesirable, yellow=slightly undesirable, green=desirable
Note that this desirability manifests through prices. For having shopped for a condo recently, I can tell you that the higher the floor, the higher the price, and that ground and basement units are significantly cheaper (yet remain on the market longer).

Commercial: Stores and other commercial offices tend to have a mirror desirability to residential uses. Though both residential and commercial want to be near one another, people choosing their residence flee from traffic and noise, while stores are drawn to them like moths to a flame. Well, noise is not desired but commercial uses are often indifferent to it. Traffic is crucial because the best publicity is being on the way of thousands of people's daily trips. Whether that traffic is pedestrians, cyclists, drivers or, sometimes, transit users, it doesn't matter. The important thing here is VISIBILITY, the opposite of privacy. The more people pass in sight of a store, the higher the potential for pass-by trips. Unlike residential uses, the higher the floor, the less visible it is, so the less desirable the location.
Commercial desirability, per floor, in relation to an arterial (the large black road), red=undesirable, yellow=slightly undesirable, green=desirable
Note that commercial uses want traffic, but they also create traffic. Indeed, the best way to attract life on a street is to have plenty of commercial uses there. So commercial uses will tend to congregate to benefit from each other's traffic, and to create city-wide visibility for that commercial area, to generate more traffic. At the same time, this traffic will tend to push away residential uses.

Offices: offices are workplaces where plenty of people work. often on fixed schedules. As a result, offices generate a lot of trips in the peak travel periods, but they require little to no freight to operate as they produce services, not goods. Offices don't care much about visibility or privacy in general, though noise may be distracting for employees, they don't have much pass-by clients, and even less pass-by employees! People using their services generally learn of their existence through other means (internet, business contacts, etc...). What offices want most of all is to be located at nodes of regional passenger transport links. That way, they have access to larger pools of potential employees and they don't have to fear lost productivity due to congestion getting to work. So they will tend to mass around transport nodes, public transport or highways.
Office desirability, per floor, in relation to an arterial (the large black road), red=undesirable, yellow=slightly undesirable, green=desirable

Like commercial uses, they sometimes have an advantage in congregating together, because sometimes offices require each other's services. Also, in the modern world, with job security on the decline, the concentration of industries in given nodes allows to mitigate the effects of changing jobs. Having your contract not renewed is bad, but if you have half a dozen other potential employers within a 10-minute walking distance, at least you can hope for not having to move your family to accommodate your next job.

Since offices generate quite a bit of traffic, commercial uses may be attracted to them too.

Industries: Industries are a bit like offices, with high peaked traffic, though generally not as high, especially with modern automation. However, unlike offices, industries depend a lot on freight, so instead of desiring locations near nodes of passenger transport links, they want to be near nodes of freight transport links: train station, ports, interstate freeway exits. Most industries rely on just-in-time transport, so unreliable freight, including due to congestion, is highly undesirable for them and they may move out of areas if freight becomes too unreliable. Unlike all the other uses, industries will not particularly favor urban areas, industries take too much space, which is expensive in cities, and they don't benefit from traffic. They still want to be reachable to employees, but they can be satisfied with being out of the way and accessible by shuttles, because transport demand is highly predictable and limited in time.

Note that when freight and passenger transport links overlap, like on highways, this can create tensions between industries and offices who can then go after the same locations, submerge them with congestion, which pushes industries ever further out.

So to sum up, each use favors different locations. So in a completely free development context, we could expect uses to separate over time anyway following a certain logic. Some uses will still favor proximity to one another (residential and commercial uses mostly), but they will tend to maintain some buffer, whether horizontal or vertical, with one another.

So what does it all mean?

What this reasoning would entail is that use separation can be expected to be a spontaneous reaction and is not necessarily bad.
Though Japanese zoning allows many different uses in its commercial zones, this area near Shinjuku station is almost exclusively commercial and offices, with stores and offices occupying all the floors of 6-to-8-story buildings
Uses can be separated, yet still be in proximity with each other, such as the traditional commercial arterial of streetcar suburbs, with residential side streets. This also means that it is theoretically possible for very competent planners to predict where uses will gravitate to and use an exclusive zoning system to shape developments in a way that they would likely have evolved into anyway. However, this really requires excellent planning skill and constant revisions of zones to provide for sufficient supply of land to respond to evolving demand.

So we get to a final definition of "mixed use", a regulatory one. A zone can be called "mixed use" in urban planning if it allows for multiple uses within it without regulatory oversight. This is ideal because it creates a margin of error for planners. With exclusive zoning, planners need to be able to predict exactly how demand for the different uses will evolve. If they do not, then they create artificial land shortages for a type of use and over-supply of land for other uses, which unbalances cities and their local economies. A sadly too typical response in these cases is building new roads to open up new lands to solve the shortage rather than review current zones.

With mixed use zoning, uses can grow inside each other's zones, at least in certain areas zoned for mixed uses. This mitigates the problem of zoning and reduces the need for hyper-competent planning (which is a beast as rare as unicorns).

Conclusion

What is "mixed use"? There is no one correct definition, everyone could debate on how close is close enough before uses are considered to be "mixing". And anyway, left to their own devices, uses are quite likely to separate and congregate on their own, as each use favors different types of location. The important thing should be proximity and scale. You can have a city where uses are separated, as long as these uses are separated based on a human, walking, scale and not on a "highway-driving car" scale, that way, uses can remain in close proximity to one another, when it is beneficial for them.

The most important aspect of "mixed use" is the regulatory one: if zoning is used, zones should allow for multiples uses inside them, to provide margins of error to planners and their inevitable failure to predict correctly evolving demand for the different uses. If regulations don't allow for mixed uses, then it will inevitably create shortages of land for some uses and over-supply for others, creating distortions in the economy and failing to allow communities to grow so as to respond to their own needs.

8 comments:

  1. It's not just desirability, but also ability to pay. Offices have much less space per worker than residences have space per person: for example, the Empire State Building has about 10 m^2 per person working in it, whereas residential space is several tens of square meters per resident.

    Moreover, CBD offices tend to have better-paid workers than the rest: the land is very expensive, so only the richest companies (or the ones most in need of agglomeration) locate there, and those tend to have highly-paid workers as well. This means that the average person working in these 10 m^2 offices has more residential space than most people.

    In the same way that apartments are smaller in city center than in the suburbs, it makes more sense for city center to host small offices than bigger apartments. Industry, which is a land hog, would be dispersed even farther away, with remaining industrial usage in New York relegated to port activities and zoning-protected factories that would be converted to lofts or torn down and replaced by condos if it were legal.

    ReplyDelete
    Replies
    1. Yes indeed, when a location is desirable for many different uses, the use that is willing to pay more for it will win out. Though I'm not certain of the assumption that employee density can be directly compared to resident density to determine what people are willing to pay. So even if offices are denser, it doesn't necessarily mean that they have more value per square meter. They probably do in most cases, but I'm not certain.

      And indeed, industrial conversions are to be expected in dense urban areas because of the land requirement for most industries, or because previous freight transport links are now under-used (for example, if a port declines or if an urban highway is so jammed that trucks don't want to use it anymore, or if a bypass is built).

      Delete
  2. The question of industry is an interesting one. In Toronto, it seems like the planners have ensured a vast supply of land is zoned industrial as an economic strategy, so that even in peripheral areas, industrial zoned land is worth less than residential land ($1m/acre vs $2-5m/acre if the land is serviced). The difference is even greater in more close-in areas where industrial land is still worth about $1m/acre and residential land is $5-10m/acre. The difference is even greater if the residential land is zoned for relatively high densities ($10-20m/acre).

    In the industrial era (pre-highway) land with suitable access to freight transportation was more limited, it seems mostly around railway lines and ports. Not only that, but the pollution often depressed residential desirability of the core, allowing central industrial zones to expand.

    I wonder what would happen if industrial zoning went away. Would industry mostly adapt and become more efficient with land? I guess this is more likely to happen if the entire region or nation does this as opposed to a single city. Or could highway tolling + up zoning of central areas reduce housing demand on the periphery, as well as reducing congestion, allowing the periphery to remain suitable for industry? Could the increased land use efficiencies have other advantages, like reducing housing costs and more disposable income for residents to stimulate other sectors of the economy?

    ReplyDelete
    Replies
    1. I think that industrial land tends to be worth little because it generates less income per acre. Industries rarely have more than 2 or 3 stories and often require large parking for trucks and trailers, so this lowers FAR due to practicality issues, therefore reducing the value of land. As I said in my previous post, land prices depend on profits that can be made developing that land, if industries are low densities for practical reasons, then that keeps industrial land value down.

      I guess some industries can densify, but not all, so without industrial zoning, I guess that industries would keep being pushed to the periphery or in areas that, due to pollution, noise, traffic or else, remain completely undesirable for other uses. Still, without zoning, you might see much higher residential and commercial densities too, so the periphery would be much closer to the central city than otherwise.

      Delete
    2. The one advantage of industry is that it has the lowest need for natural light of all the uses, so you can have large floor plates. Is the truck/trailer parking that important? Part of what causes it to take up space in Toronto seems to be that the loading bays are on the side or back rather than front of the building, I'm not sure if that's the owner's preference or due to zoning.

      A lot of industrial areas elsewhere in the world will also use on-street parking for employees rather than off-street, which probably takes up less space. Even with a single floor, new logistics warehouses in the Toronto area often have FAR over 0.5 which is comparable to denser SFH development. Multiple floors are unusual, generally it's just very high ceilings, and maybe mezzanine space and 2-3 floors of attached office space for the engineers, managers, etc. Industrial areas in Asia and Europe often have even higher ground coverage, close to 100%, with little truck/trailer parking.

      Multi-storey industry will exist but it's typically not very common. Aside from the more well known exceptions of Hong Kong and Singapore, you'll also find industry in mid-rise buildings in Shenzhen, where I think they house mostly labour intensive manufacturing. There's also the ~60s garment warehouses on Chabanel in Montreal...

      I guess industrial uses can always go in places that are undesirable to residential uses, like near airports, highways*, and maybe also water treatment plants, power plants, oil refineries and meatpacking. Otherwise though most industry today is not that detrimental to the desirability of nearby areas.

      How about remediation issues though? Lets say you have an outer suburb with an industrial area, and the city expands outwards so that the outer suburb becomes an inner suburb and land values go up. Is it still relatively common for sites to get contaminated (even if not as badly as in the past)? If sites require remediation that will reduce their value for residential development. Can contaminated sites (assuming the contamination is moderate) be used for new industrial uses?

      I also wonder if there's any potential for industry along arterial roads. Arterial roads in suburbs are often where transit is, and the zoning often encourages higher density housing (or retail) to go there. However, I wonder if the traffic noise might mean that industrial uses would also make sense. It could be a positive especially for industry with lower-wage workers who might be interested in taking transit. A lot of industrial parks today are very difficult to serve with transit.


      I also wonder if there's any potential for ground floor industry with residential above. I know Nathan Lewis said he lived above a small electronics distribution warehouse in Tokyo. If the industrial use creates relatively little noise or there's good sound insulation it might make sense in urban settings since as you said the ground floor is less desirable for residential and there probably won't be demand for retail on the ground floor of every building.

      *I suspect tolling highways would reduce competition for land from retail and offices. Right now there's quite a lot of those near highways, but maybe if they were tolled they'd move to arterial road intersections or more transit accessible locations.

      Delete
  3. Zoning, at least in the US incarnation is a pretty totalitarian endeavor, in the sense that everything that is not mandatory is prohibited. Now that the planners have realized that maybe having apartments above shops is a good idea, they're creating "mixed use zones" where vertical mixed use is mandatory, rather than stepping back from the levers of central planning and letting people have some flexibility in deciding what the best use of space is.

    Meanwhile on the opposite end of things, in China, there is allegedly a cell phone designer who lives in a 3 story building: the top floor is his residence and home office, where he designs the products, the middle floor is a manufacturing line to make the circuit boards, and the ground floor is the store where they're sold (as seen on Bunnie's blog). And, as is pointed out in a comment there, this sort of thing would never fly in the US due to zoning: any zone in which one of the uses would be allowed will tend to exclude all the other ones.

    ReplyDelete
  4. More flexibility in zoning is really important in mixed use areas. In Montreal, many of our urban commercial arteries have been hit hard by regional economic changes. The city is now permitting a bit of infill condo development in these areas, but that is not what is necessary to animate areas which have shifted from a regional to a more local catchment basin. The people who are buying condos in these areas are generally not there during the daytime hours. We should be finding ways to encourage land-uses which will bring people to the area for something other than commercial reasons: small scale offices, health-care clinics, etc.

    The way the current zoning works, it is incredibly difficult to change usage, and if one does it is even harder to return to the previous usage. For example, I have a friend who owns a duplex along Ave du Parc. She would love to rent out the first floor to an office or something, but if she does that she will lose the 'droits acquis' which she has for the residential expansion which was done by a previous owner. Furthermore, if she were to change to a commercial zonage for that floor, it would be extremely difficult to go back to residential.... It really is not clear what would be a 'successful' occupation for this space, but we should be helping people to try - this really is an artery which needs help not more barriers!

    ReplyDelete
  5. Uses do tend to separate to an extent over time, but if you look at history, I think you see that the degree to which uses separate in this day and age is somewhat unique. Zoning was part of it, but pollution regulation also played a role. One of the things urban planners have failed to pay attention to is multiple uses of the same space, which were once more common.

    Last fall I met a couple who have a company making scented candles and soaps. They started it in their home and now lease space in an office building. Similarly, there's a book store near me that has a machine that prints and binds books on demand.

    Neither venture would show up in zoning (and there's some indication that the city could have shut down the couple's business for zoning violations), but preventing people from running businesses out of their homes seems counterproductive.

    ReplyDelete